Length: 3m; Vertical cover: 100mm; Wall penetration: 35mm
Dark grey, non-adhesive finish to simulate the appearance of lead. Do not topcoat.
This trim can be purchased in 1.5 metre or 3 metre lengths.
The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc.
Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim. Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in.